Wizards; Wizard Overview - Siemens SITRANS LR500 Series Operating Instructions Manual

Commissioning
7.6 Local commissioning
Button functions for editing
Button
7.6.4

Wizards

7.6.4.1

Wizard overview

Note
Important information regarding the use of commissioning wizard
• Settings for quick start wizard are inter-related and changes apply only after "Finish" is set to
"Yes" in final step.
• Do not use quick start wizard to modify individual parameters.
Perform customization for your application only after "Quick start" wizard has been
completed.
Note
Parameter settings properly stored
To ensure parameter settings are properly stored in the device, wait 30 seconds after any
configuration change before removing power from the device.
Note
No user-relevant data is lost in the event of a power failure.
1. Press
2. Configure each parameter per step, then select "Next" to proceed. In the final step, when
asked to "Finish", choose "Yes" to save changes.
3. Next, "Exit" the wizard. After exiting the wizard, press
In the upper left corner of each view, the wizard name appears, followed by each step name.
In the upper right corner, the view number is shown. The number of steps depends on the
actual device variant ordered.
68
Name
UP or DOWN Selecting parameter set‐
arrow tings
Alpha-numeric editing
RIGHT arrow Selecting parameters
LEFT arrow Selecting parameter set‐
tings
to enter the "Quick start" menu, and again to start the "Quick start" wizard.
Function
Scrolls to item
Increases or decreases value. Pressing and hold‐
ing increases scrolling speed through values.
Accepts the data (writes the parameter setting)
Cancels edit view without changing the param‐
eter setting.
to return to operation view.
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA