Introduction
2.1
Purpose of this documentation
These instructions contain all information required to commission and use the device. Read the
instructions carefully prior to installation and commissioning. In order to use the device
correctly, first review its principle of operation.
The instructions are aimed at persons mechanically installing, connecting and
commissioning the device, as well as service and maintenance engineers.
2.2
Document history
The following table shows major changes in the documentation compared to the previous
edition.
Edition
03/2024
2.3
FW revision history
Sensor
Firmware revision PDM EDD revision Date
1.00.00
HMI
Firmware revision Date
1.00.00
2.4
Product compatibility
The following table describes compatibility between manual edition, device revision,
engineering system and associated Electronic Device Description (EDD).
Manual
Remarks
edition
03/2024
First edition
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA
Remark
First edition
1.00.00
March 2024
Device revision
HART
FW: 1.00.00 or later
HW: 1.00.00 or later
Device revision 1 or later
Changes
March 2024
•
Initial release
Changes
•
Initial release
Compatible version of device integration package
SIMATIC PDM V9.2
2
EDD: 1.00.00 or later
13