Parameter Assignment; Parameter Menus; Quick Start Wizard - Siemens SITRANS LR460 Operating Instructions Manual

Parameter assignment

8.1

Parameter menus

The parameters are grouped in menus according to function. Submenus arranged on four
levels give access to associated features and options.
Parameters accessible via the handheld programmer are preceded by a number (see LCD
menu structure (Page 172)). Parameters not preceded by a number are accessible only via
SIMATIC PDM.
Some parameters are accessible in SIMATIC PDM via pull-down menus. Where those
parameters can also be accessed via the handheld programmer, they are found in the
numbered list, and directions for PDM are given beside the individual parameter. Page
references for further information can be found under Pull-down menus for HART via SIMATIC
PDM (Page 63).
Note
• Default settings in the parameter tables are indicated with an asterisk (*) unless explicitly
stated.
• For Quick Access to parameters via the handheld programmer, press Mode to activate
PROGRAM mode, then key in the menu number.
• Values shown in the following tables can be entered via the handheld programmer.
8.2

Quick start wizard

The Quick Start wizard groups together all the settings you need to make for a simple
application.
• The wizard is a complete package and settings are inter-related.
• Do not use the wizard to modify individual parameters. (Perform any customization only
after Quick Start has been completed.)
• You can access the Quick Start wizard either via SIMATIC PDM, or via the handheld
programmer.
• Each time the Quick Start Wizard is initiated, the start-up settings are factory defaults. The
Wizard will not recall previous user-defined settings.
SITRANS LR460
Operating Instructions, 10/2021, A5E42035355-AB
8
67