Remote Operation; Simatic Pdm; Simulation (Under Pdm; Overview Simatic Pdm - Siemens SITRANS LR500 Series Operating Instructions Manual

Remote operation

D.1

SIMATIC PDM

D.1.1 Simulation (under PDM appendix)
Both process values and diagnostics can be simulated in SIMATIC PDM. For more details,
see Simulation (Page 89).
D.1.2

Overview SIMATIC PDM

SIMATIC PDM (Process Device Manager) is a general-purpose, manufacturer-independent tool
for the configuration, parameter assignment, commissioning, diagnostics and maintenance of
intelligent field devices and field components. Follow-up installations and additional
information on SIMATIC PDM are available on the Internet at SIMATIC PDM
www.siemens.com/simatic-pdm).
SIMATIC PDM monitors the process values, alarms and status signals of the device. It
allows you to display, compare, adjust, verify, and simulate process device data; also to set
schedules for calibration and maintenance.
For information on, for example, how to install and integrate devices, commission
the software, see Operating Manual 'Help for SIMATIC PDM'. The manual is delivered
with SIMATIC PDM software. Once the SIMATIC PDM is installed on your computer
you find the manual under: Start > All programs > Siemens Automation > SIMATIC
> Documentation. Link at our website: SIMATIC PDM instructions and manuals
support.industry.siemens.com/cs/ww/en/ps/16983/man).
Note
Field device parameters
• For a list of parameters and additional information, consult section "Operating via SIMATIC
PDM (Page 93)".
• The field device remains in measurement mode during the time you configure the field
device.
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA
D
(https://
(https://
207