Remote operation
D.2 Bluetooth
When the connection is established, the LED on the SITRANS AW050 Bluetooth adapter
flashes every second.
D.2.4
Default password
The default delivery password must be changed for the first connection setup.
The default password is: "Sitrans AW050!".
Note that this password:
• Is used in the procedure to connect the field device with SITRANS Mobile IQ.
• Is the default used when the password is reset.
D.2.5
Reset Password
Procedure
1. Select "Bluetooth password reset".
2. Once you have selected "Bluetooth password reset", disconnect the ribbon cable between the
SITRANS AW050 and the device within 60 seconds.
3. Wait for 30 seconds.
4. Insert the ribbon cable again.
The password is reset to the default password.
D.2.6
Technical data: SITRANS AW050 Bluetooth adapter
Operating conditions and structural design
Ambient conditions
Ambient temperature
•
Permissible ambient temperature for operation
•
Relative humidity
Degree of pollution
Overvoltage category
Weight
•
With cable gland
•
Without cable gland
Degree of protection
EMC
212
For use indoors and outdoors.
Observe the maximum permissible ambient temperature of
the connected field device.
-40 ... +80 °C (-40 ... +176 °F)
0 ... 100%
2
II
24 g
13 g
•
Type 4X, Type 6 in accordance with UL 50E
•
IP66, IP68 in accordance with IEC 60529
EN 61326
Operating Instructions, 03/2024, A5E51099898-AA
SITRANS LR500 series with mA/HART