Programming - Siemens SITRANS LR500 Series Operating Instructions Manual

Parameter view
①
②
③
1) Press UP or DOWN arrow to switch
In response to a key press request. For details, see measurement mode.
2)
7.6.3

Programming

From measurement view, press
To select a listed option:
1. Navigate to the desired parameter.
2. Press
The current selection is highlighted.
3. Scroll to a new selection using
4. Press
To change a numeric value:
1. Navigate to the desired parameter.
2. When selected, the current value is displayed.
3. Press
The "EDIT" symbol flashes.
4. Use
speed.
5. To escape without saving your changes, press
6. Press
The display returns to parameter view ("EDIT" symbol is no longer flashing) and shows the
new selection. Review for accuracy.
SITRANS LR500 series with mA/HART
Operating Instructions, 03/2024, A5E51099898-AA
Parameter name
Parameter number
Parameter edit
to open edit view.
to accept it. The display returns to parameter view and shows the new selection.
to configure it.
and to increase or decrease the value. Press and hold button to increase scrolling
to accept the new value.
Edit view
④
Parameter value/selection
⑤
Parameter navigation to the previous or
next parameter in the menu
⑥
Parameter icon
to enter parameter view and open the first menu level.
and .
to return to parameter view.
Commissioning
7.6 Local commissioning
67