Installing The „Ssb" Board - Siemens SIMOVERT FC Series Operating Instructions Manual

01.97
4 Installing the „SSB" board
♦ ♦ Installing types E ... H
The „SSB" board is inserted at connector X258 of the power supply. The ribbon cable to the electronics box
should now be connected at connector X538 on the „SSB". The mounting position of the power supply can be
taken from Fig. 2.1 or Fig. 2.2.
For type E, the DC link battery can be removed so that it is easier to access connector X258 of the power
supply.
6SE7090-0XX84-1HK0
476 479.9000.00
Fig. 4.1
1.
Bolt the mounting bracket to "SSB"
SiemensAG 6SE7080-0AX87-1JB0
Safe Stop Board Operating Instructions
C
A
B
Fig. 4.2
2.
Power-down SIMOVERT MASTER DRIVES!
For 230 V AC DC units
do not forget the fan power supply
check that the DC link is discharged!
A) Remove socket connector X18
B) Remove the ribbon cable from connector
X258
C) Remove the bolt at X1
23