Transport, Unpacking, Installation; Transport, Unpacking; Installation - Siemens SIMOVERT FC Series Operating Instructions Manual

Masterdrives cbc - communication board can-bus
Table of Contents

Advertisement

12.95
2

Transport, Unpacking, Installation

2.1
T100 technology boards are packed in the manufacturing plant in accordance with the data on the order. A
product packing label is provided on the box.
Vibration and jolts must be avoided during transport, e.g. when setting the unit down.
Please observe the instructions on the packaging for transport, storage and proper handling.
The board can be installed after it has been unpacked and checked to ensure that the consignment is
complete and that the board and software module are undamaged.
The packaging comprises board and corrugated paper. It can be disposed of according to the appropriate
local regulations for cardboard products.
If you discover any damage, please contact your shipping agent immediately.
The boards must be stored in clean, dry rooms at temperatures of between − 25 °C (−13 °F) and +70 °C (158
°F). Temperature fluctuations of > 20 K per hour are not permissible.
2.2
Supplementary boards can be guaranteed to operate safely and reliably only if they are
installed and commissioned by qualified personnel according to the warnings given in these
Instructions.
In particular, the general and national erection and safety regulations governing work on
high-power installations (e.g. VDE) and regarding the correct use of tools and personal
protective gear must be observed.
The boards must be installed in accordance with local guidelines and standards.
Failure to observe this warning can result in death, severe personal injury or substantial
property damage.
The board must be protected against the ingress of foreign bodies or else correct
functioning and operational safety cannot be guaranteed.
Siemens AG 6SE7080-0CX87-0BB0
T100 Technology Board Operating Instructions

Transport, unpacking

Installation

Boards may only be replaced by qualified personnel.
Boards must not be removed or inserted when the power supply is connected.
Failure to observe this warning can result in death, severe personal injury or
substantial property damage.
WARNING
WARNING
Transport, Unpacking, Installation
2-1
ENGLISH

Advertisement

Table of Contents
loading

Table of Contents