Installation - Siemens SIMOVERT FC Series Operating Instructions Manual

CBP / CBP2 - Communication Board PROFIBUS
3

Installation

NOTE
Siemens AG 6SE7087-6NX84-0FF0
SIMOVERT MASTERDRIVES
If the inverters/converters are ordered with optional functions, the optional
boards are already installed in the units when they are delivered.
It is possible to retrofit optional boards and this can be carried out by the user.
For this purpose, there are either three or up to six slots on the basic unit
depending on the type of construction for mounting the optional boards.
An exact description of installation is included with the relevant basic unit. As
the unit has to be removed and opened in order to install optional boards,
attention must be paid to the ESD measures. Please refer to the operating
instructions of the basic unit in this regard.
Generally, you can install the CBP optional board (communication board
PROFIBUS) in every slot. However, bear in mind that a sensor board always
requires slot C.
Two CBPs can be fitted per device.
Operating Instructions
Installation
3-1