Standard Parameters - Mitsubishi Electric FR-A7NP Instruction Manual

7.8 Standard Parameters

You can use the PNU to make parameter settings from the network.
The table below lists PNU numbers corresponding to parameter numbers.
Standard parameter examples are introduced below. Refer to the examples and make parameter settings.
Refer to the inverter manual for details of the parameters.
Representation of the PNU for standard parameters (Example: Pr.902)
P1902.1
Sub-Index Number
1000+Parameter Number
Example of parameter list
Parameter
PNU
Number
0 P1000 Torque boost
1 P1001 Maximum frequency
2 P1002 Minimum frequency
3 P1003 Base Frequency
4 P1004 Multi-speed setting (high speed)
5 P1005 Multi-speed setting (middle speed)
6 P1006 Multi-speed setting (low speed)
CAUTION
Write to Pr. 77 and Pr. 79 is not allowed from the network with the FR-A7NP. (Read is allowed.)
Name
PPO TYPE SUPPORT
SPECIFICATION
Minimum Setting Range
Setting
Decimal
Increments
0.1% 0 to 30
0.01Hz 0 to 120
0.01Hz 0 to 120
0.01Hz 0 to 400
0.01Hz 0 to 400
0.01Hz 0 to 400
0.01Hz 0 to 400
Data
Type
Hexadecimal
0 to 12C Us16
0 to 2EE0 Us16
0 to 2EE0 Us16
0 to 9C40 Us16
0 to 9C40 Us16
0 to 9C40 Us16
7
0 to 9C40 Us16
61