Table of Contents
Advertisement
contact (see chapter Safety Instructions / Ink
Cartridges).
Take the ink cartridge out of the packaging, dispose
4
of any packaging material and carefully pull off the
protective strip.
Æ
Please make certain that the protective strip
has been completely removed. Be careful not
to touch the nozzles or contacts.
5
Insert the cartridge with the "nose" pointing down
and tilted back at an angle; the black cartridge
on the left, the colour cartridge on the right.
6
Close the cartridge holder. You will hear a click
when the cover of the holder snaps into place.
12. Troubleshooting
7
Close the housing.
Insert the enclosed Plug'n'Print card into the slot
8
below the panel with the contacts facing up.
It may take a moment to update the cartridge.
9
When the process is completed, the following ap-
pears on the display: ACTION COMPLETED /
Remove Card.
10 Pull the Plug'n'Print card out of the machine. The
newly inserted cartridge is activated.
²
A cartridge that has once been activated with
the enclosed Plug'n'Print card will be recog-
nised by your machine, even if you remove the
cartridge temporarily. You do not need to update
the cartridge again when you reinsert it!
11 For optimal printing quality, we recommend rea-
ligning the cartridges after each cartridge switch.
Confirm the display query ALIGN. NEW with
OK. Press the X button if you do not want to
realign the cartridges (see also Cleaning and Care /
Cleaning and Aligning Cartridges).
Inserting Photo
Cartridge
For the special requirements of high-quality photo
printing, we recommend using a photo cartridge (see
the order service on the back page of this user manual).
1
Open the machine and the catch of the cartridge
holder as described under Changing Cartridges.
2
Take out the black cartridge and insert the
photo cartridge in its place. Update this with
49
Hide quick links:
Advertisement
Table of Contents
