Copier K; Making Copies With The Factory Settings; Making Copies With Custom Settings - Philips CRYSTAL 650 User Manual

Copier K

4. 4.
With your multifunction machine, you can create high
quality colour and black-and-white copies on various
paper types and formats. You can either copy automati-
cally—in other words, using the factory settings—or
you can use custom settings.
²
Use the image and text enhancement function
Crystal Image to create quality copies in col-
our or black-and-white. At the start of the copy process,
press the µ button to activate Crystal Image (see chap-
ter Crystal Image).
Making Copies with
the Factory Settings
Lay the document onto the flatbed scanner with
1
the written side facing down (see chapter Installa-
tion / Loading Documents).
Press one of the two K buttons (copy in colour or
2
black-and-white) twice. The copy is created.
Making Copies with
Custom Settings
1 Lay the document onto the flatbed scanner with
the written side facing down (see chapter Installa-
tion / Loading Documents).
Press one of the two K buttons (copy in colour
2
or black-and-white) once. You have the following
options available:
Use the number keypad (or use /) to enter the
3
desired number of copies (1 to 99) and con-
firm with OK.
You have a higher resolution available to you for
4
copying than you have for fax transmissions. Select
the desired resolution with /:
DRAFT—For documents without drawings or details.
This is the fastest setting for copying. However, the
printing quality may appear worse. Confirm with OK.
4. Copier
NORMAL—For documents with small print or draw-
ings. This setting is the best option for most copying
needs. Confirm with OK.
QUALITY—For the highest resolution. The copy proc-
ess is slower than with the other two settings. This set-
ting produces the highest printing quality for image
files or photos. Confirm with OK.
²
For the special requirements of printing high
quality photos, we recommend using photo
paper (see chapter Installation / Loading Printing
Media / Loading Photo Paper) combined with photo
cartridges (see section Troubleshooting / Inserting
Photo Cartridges).
Under Scan SIZE use / to select the for-
5
mat of the loaded document and confirm with-
OK.
Under PapER SIZE use / to select the format
6
of the desired printing medium and confirm with
OK.
If the scan and paper formats are the same (see
7
steps 5 and 6), you can copy a document scaled
to as small as 25 % of the original size or magni-
fied as large as 400 %. The proportions of the origi-
nal are retained. Enter the desired value using the
number keypad (or with /) and confirm with
OK.
²
Align the document with the rear left corner
of the scanner glass.
If you would like to copy a detail (such as a graph-
ic) of your document, position the document such
that the corner of the detail is up against the origin.
Using the zoom function, you can separate the de-
sired area from rest of the document.
For a colour copy: Use / to set the saturation
8
(colour density). The saturation is measured in
COPIES 1
relation to the contrast: - diminishes the colours
(down to the grey range), + intensifies the colours.
Confirm with OK.
Use / to set the brightness of the copy:
9
- darkens the copy; + brightens the copy. Confirm
with OK.
10×15 cm
10×15 cm
ZOOM 250%
23