Connecting The Power Cord; Country Selection; Language Selection; Entering Telephone Number And Name - Philips CRYSTAL 650 User Manual

For all other countries
Connecting the Power
Cord
Insert the small plug of the power cord into the power
cord socket on the rear side of your machine. Connect
the large plug to the wall power socket.
Once you have connected your multifunction machine
to the power supply, it will lead you through the follow-
ing basic configuration process. You can change these
settings at any time (see chapter Settings).
²
When not in use, your multifunction ma-
chine switches to the energy saving Stand-by
mode (see Settings / Energy Saving Mode).

Country Selection

1 Press OK.
Use / to select the country in which you are op-
2
erating the machine.
Press OK twice.
3

Language Selection

Press OK.
1
Use / to select the desired display language.
2
3 Press OK twice.
16
Entering Telephone
Number and Name
If you would like your telephone number and name to
appear on outgoing messages as a sender identification
(= header), enter your sender identification here:
²
You can suppress the header line for each
type of message individually (see chapter
Fax / Fax Settings or SMS / Changing the SMS
Settings).
Number Entry
(max. 20 digits)
Entering numbers with the Crystal 650
Enter your telephone number using the number
keypad, then press OK. You can enter special characters
with the 0 button. Hold the button until the desired
special character appears on the display:
Button Character
0
0 + space
Entering numbers with the Crystal 660
Enter your telephone number using the number keypad,
then press OK. (For a plus sign, press the
and Q on the letter keyboard at the same time. For a
space, press the button ½.)
Name Entry
(max. 20 characters)
Entering letters with the Crystal 650
You can also enter letters with the number keypad (see
button labels). You can enter special characters with the
0 button. Hold down the respective button until the
desired letter or special character appears on the display:
Button Character
0
space . - 0 + ? / : % ! ( ) [ ]
If you have entered an incorrect number or letter, you
can correct the entry with / and C. Press OK after
completing the entry.
Entering letters with the Crystal 660
Fold open the cover for the letter keypad. To enter up-
per case letters, press + and the desired key at the same
time. The available special characters are printed above
and to the right of the keypad buttons and can be en-
tered by pressing the Ü button simultaneously with
the corresponding letter button (for example, press the
Ü button and ½ at the same time to enter @). Press
½ to enter a space.
If you have entered an incorrect number or letter, you
can correct the entry with / and C. Press OK after
completing the entry.
Ü
button
1. Installation