Philips CRYSTAL 650 User Manual page 54

Installing All Applications
Æ
First install the software Companion Suite
IH, then restart the PC. Only afterward
should you connect your multifunction machine
to the PC with a USB cable.
Click in the Companion Suite IH start window
1
on the button Install products and select All
products in the following window to install all
applications on the installation CD (scanner and
printer driver as well as the programs Photo Im-
pression and Paper Port).
Æ
The program Acrobat Reader must be in-
stalled separately (see Installing Individual
Applications).
2 The program Photo Impression is installed; this
process may take some time. The installation wiz-
ard will guide you through the rest of the installa-
tion; confirm with Next.
Before continuing the installation, read the license
3
agreement and accept it with Yes.
4 Windows 2000 · XP users: Your multifunction
machine was tested and developed for PHILIPS to
guarantee complete compatibility with Windows
54
2000 and Windows XP. Click on Next to continue
with the installation.
Click on Install to start installation of the device
5
drivers. This process may take a few minutes.
The shortcuts Companion – Director and Com-
panion – Monitor are created on the desktop of
your PC (see Using Companion Suite IH).
Click on Next to start the installation of the
6
programs Paper Port and the application One
Touch.
The programs of the software suite are saved in the
Program Files folder of your PC by default.
After the installation, you will be asked to restart
7
the PC. Remove any diskettes from the drives and
click on Finish. Take the installation CD out of
the CD-ROM drive after Windows has restarted
and the installation is completed.
²
You can also restart the PC at a later time
to allow you to continue working with other
open programs or save unsaved data.
Connect the multifunction machine to your PC
8
with a typical USB cable only after the restart.
You will find the USB port of the machine located
on the back of the machine.
1. Installing the Driver and Software