Installation; Package Contents; Setting Up The Multifunction Machine; Loading Printing Media - Philips CRYSTAL 650 User Manual

1. 1.

Installation

Package Contents

The following parts are included in the package:
²
If a part is missing that is not one of the coun-
try-specific items or if parts are damaged,
please contact your retailer or our customer serv-
ice (see back side of this user manual).
12
Setting Up the
Multifunction Machine
1
Æ
Multifunction
machine
2
Printout tray
Two ink cartridges
(black and colour)
User manual
3
Installation guide
Installation-CD
Power cord with plug
(country-specific)
Telephone cord with
plug
(country-specific)
USB cable
(country-
specific package contents)
Loading Printing
WLAN adapter
(country-specific package
contents)
Media
Load paper into the paper tray before plugging in the
Sample paper
machine. Your multifunction machine supports nu-
(country-specific pack-
merous paper formats and types. You can use both pre-
age contents)
printed material and refill paper of the supported paper
types (see chapter Appendix / Technical Data).
Remove the transport protection (e.g. tape). Any
sticker can be pulled off without leaving any resi-
due.
Set up your machine so that the socket is
easily accessible because your multifunction
machine does not have an on/off button. (To
disconnect your machine from the power supply,
pull the power plug out of the socket—see the
chapter Safety Instructions.)
Insert the printout tray into the slot provided in the
paper output until reaching the stop.
Pull the printout tray as far out as possible and fold
the paper stopper up to prevent a paper jam.
1. Installation