Pictbridge-Directly Printing Files; Slideshow; Transferring A Scan To A Memory Card - Philips CRYSTAL 650 User Manual

Hide thumbs Also See for CRYSTAL 650:
Table of Contents

Advertisement

5
For Colour printout with Crystal Image: If you
want Crystal Image to implement the red eye re-
duction, use / to select reduction and con-
firm with OK.
²
Red eye reduction is a complex process and
can take some time. Confirm the query only
when needed.
Your multifunction machine starts the printing
6
with the user-defined settings.
²
Return to the last menu entry with C. You
may terminate the print job with X. The
page is ejected.
PictBridge-
Directly Printing Files
Your multifunction machine meets the PictBridge stand-
ard. With PictBridge, the digital camera directly access
the photo printer. If you have connected a PictBridge
compatible digital camera to the multifunction ma-
chine, the message PICT BRIDGE appears on the dis-
play. The PictBridge function displays the print settings
supported by the multifunction machine (resolution,
paper format and type, file format, Crystal Image im-
age enhancement, etc.) on the display of your digital
camera.
Perform all the required steps on the digital camera.
Start the PictBridge printout directly from your digital
camera.
²
Connect the power supply of the digital cam-
era during the direct printing or make certain
that the battery is fully charged to prevent loss
of data.
Do not disconnect the USB connection until the
multifunction machine has completed all print
orders (see chapter Safety Instructions / Photo
Memory Media).

Slideshow

(Crystal 660)
With this function, all photos detected on the storage
medium are shown on the colour display for five sec-
onds each.
Activate the function by using / in the photo menu
to select slideshow and confirm with OK. The
slideshow is started. After all the photos have been dis-
played, the machine returns to the photo menu.
²
Return to the last menu entry with C; return
to the starting mode with X.
Æ
It is only possible to display an image file if the
storage medium provides the required EXIF
information.
5. Photo Printer
* Transferring a Scan to a Memory Card— It is possible that individual functions are not yet activated for your machine firmware.
Update the firmware of your machine (see section PC Functions / Using C
Transferring a Scan to
a Memory Card*
With this function, you can scan a document with the
flatbed scanner and transfer the scan to the inserted
memory card.
²
Use the image and text enhancement function
Crystal Image to create a quality scan of the
document (in colour or black-and-white). Press the µ
button to activate Crystal Image (for more detailed in-
formation, see chapter Crystal Image).
Insert the memory card into your multifunction
1
machine (see Using Photo Storage Media).
In the photo menu, use / to select SCAN TO
2
CARD and confirm with OK.
²
You can also access this function directly by
pressing MENU/OK and 86.
3
Lay the document onto the flatbed scanner with
the written side facing down (see chapter Installa-
tion / Loading Documents) and confirm INSERT
DOCUMENT with OK.
Use / to select the desired paper format for the
4
scan and confirm with OK.
5
Select the resolution. Depending on the document
requirements, use / to change the standard set-
tings for the current scan:
TEXT—For documents without drawings or details
NORMAL—For documents with small print or drawings
Photo—For the maximum resolution
Confirm with OK.
Use / to select the quality with which you would
6
like to save the scan:
LOW—The scan is saved with low quality and requires
less memory space.
MEDIUM—The scan is saved with average quality.
hIGH—The scan is saved with high quality and requires
more memory space.
Confirm with OK.
OMPANION
10×15 cm
S
IH / Firmware Update).
UITE
29

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal 660Crystal 665

Table of Contents