Loading Documents - Philips CRYSTAL 650 User Manual

Hide thumbs Also See for CRYSTAL 650:

User manual (84 pages)

Network installation manual (12 pages)

Table Of Contents

Table of Contents

Enlarged version

Lay the photo paper in the paper tray with the coated

side (= glossy side) facing down and the short side out,

inserting it until it reaches the stop. Also enclose 10×15

paper with the tab on the front paper guide.

Protect the surface of the photo paper by in-

serting at least two sheets of paper (up

to max. 20 sheets) together into the paper

tray.

After printing a photo on 10×15 format, load A4

or letter paper into the paper tray; otherwise in-

coming faxes will not be printed out completely.

(Set the paper format and the paper type with the

functions 241 and 242 so that your multifunction

machine recognises the type of paper loaded.

Instruction on the Use of Photo Paper

Only hold the photo paper by the edges to avoid

ﬁngerprints and ﬂecks on the coated side or in the

printing area.

Avoid contact with moisture and liquids, and do

not use the photo paper in environments with high

humidity, extreme temperatures or in direct sunlight.

Store the photo paper in the original package in a

cool and dry location, and do not expose it to ul-

traviolet light.

Allow the printouts to dry under normal room

conditions for at least 24 hours. Lay acid-free paper

between the individual printouts.

Use photo albums of acid-free material, and avoid

plastics that contain PVC to prevent your photos

from fading.

Follow these instructions to achieve the best pos-

sible durability and printing quality with the photo

paper.

Loading Pre-printed Material

If you would like to print on pre-printed material (e.g.

forms, stationary), place the pre-printed material in the

paper tray up to the stop with the printed side facing

down.

If you are using pre-printed material with a letterhead,

place the paper into the paper tray with the top edge

in ﬁrst.

Loading Envelopes

Consult the help ﬁles of your PC word

processing program to ﬁnd formatting in-

structions for correctly printing on various en-

velope designs.

Insert the envelopes into paper tray with the ﬂap facing

upward and the short side out until reaching the stop.

Also enclose smaller envelope formats with the tab on

the front paper guide.

Inserting Transparencies

Insert the transparencies into the paper tray with the

printing side (= rough side) facing down until reaching

the stop. Only use transparencies that are intended for

use with inkjet printers.