Safety Instructions - Philips CRYSTAL 650 User Manual

Hide thumbs Also See for CRYSTAL 650:
Table of Contents

Advertisement

Safety Instructions

In order to avoid possible dangers, damage or malfunc-
tions, please heed the following safety instructions for
the setup and operation of your fax machine.
Setup Location
¿
The multifunction machine should rest stably and
securely on a flat, smooth and vibration-free sur-
face. If your machine sits at an angle, proper function-
ing cannot be guaranteed. Do not place the machine
on beds, blankets, pillows, sofas, carpets or other soft
surfaces due to the danger of overheating and the result-
ing risk of fire. Ensure sufficient air circulation around
the machine and do not cover the machine. Do not
operate the machine in enclosed boxes, cabinets, cup-
boards, etc. The distance to other machines or objects
must be at least 10 cm. Leave 30 cm of space in front
of the machine because the printouts are output on the
front side.
¿
Protect the multifunction machine from direct sun-
light, exposure to intense light and excessive heat.
Never place the machine in the immediate vicinity of
heaters, radio or television equipment or air-condition-
ers.
¿
To prevent the spread of fire, open flames should be
kept away from this product at all times.
¿
Avoid the influence of dust, water and chemicals.
Do not subject the machine to extreme tempera-
ture fluctuations and/or high humidity.
¿
Do not plug in the device in moist rooms. Never
touch the power plug, power connection or the
tele phone socket with wet hands.
¿
Should the multifunction machine fall, serious ma-
chine damage and/or personal injuries, particularly
in the case of small children, can result. Do not allow
children to handle the machine without supervision.
6
Power Supply
¿
Check whether the mains voltage specified on the
type plate of your multifunction machine matches
the mains voltage available at the setup location. In case
of doubt, consult your electrical company. Only use the
supplied power cord.
¿
Set up your machine so that the socket is easily ac-
cessible because your multifunction machine does
not have an on/off button. Lay all cables out of the way
to prevent tripping.
¿
In the event of a power failure, your multifunction
machine will not function (saved data is retained).
¿
Never touch the telephone and/or power cord if the
insulation is damaged until you have first discon-
nected the telephone and power plugs from the net-
work.
Disconnect your machine from the power and tele-
phone networks if:
¿ the housing and/or the telephone or power cords
are damaged.
¿ a thunderstorm is approaching. In this case, per-
sons operating the machine are at risk to lightning
strikes and/or the machine could be damaged. If
you cannot pull the plug, do not operate the ma-
chine.
¿ you would like to clean the surface of your ma-
chine.
¿ liquids or foreign bodies have entered the machine.
There is a risk of electric shock and/or damage to
the machine.
¿ the machine overheats and starts on fire or smoke
comes out of the machine.
Safety Instructions

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Crystal 660Crystal 665

Table of Contents