Using the Asynchronous Terminal Interface
Initiating an ATI Session
Î
2-2
The Main Menu screen is displayed on the screen unless a login ID and
password is required or the ATI is already in use.
If the ATI is already in use, you will see:
H
A connection refused or connection failed message (if you are
using a Telnet session), or
H
The IP address of the other user (if you are using the Management Serial
port).
If security is enabled on the unit and you used Telnet to access it directly (you did
not log in through the DSLAM management card), the system prompts you for a
login ID and password.
Login
Enter Password:
––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––––
Ctrl-a to access these functions
August 2000
LOGIN
Login ID:
Hotwire
Model: 797x
Î Î
Exit
7900-A2-GB21-00