Emerson Rosemount Ultrasonic 3810 Series Instructions Manual page 8

Hide thumbs Also See for Rosemount Ultrasonic 3810 Series:

Table of Contents

Plan

February 2024

5. Exit MeterLink and disconnect your PC from the meter electronics. The remaining

6. Power down the electronics.

7. Remove the end caps from the upper electronics housing of the meter to access the

information required before doing the , is based on the wiring terminations and the

settings of various switches on the boards that comprise the electronics.

CAUTION

Equipment damage

Remove power from the meter electronics.

Failure to remove power from the meter electronics may result in damage to the

equipment.

electronic circuit boards. See

See

Figure 2-14

for the 3810 Series electronics for board layout.

Figure 1-3: Remove End Caps from the Upper Electronics Enclosure

A. End cap

B. Upper enclosure

C. Enclosure bolts

D. Base enclosure

Figure 1-4

for board layout of the 3800 Series stacks.

Upgrade kit instructions

00825-0200-3810

3810 Series Electronics

Table of Contents