Table of Contents
Advertisement
Upgrade kit instructions
00825-0200-3810
3. Use the
4. Based on the information contained in the connection properties window, enter
Emerson.com
CAUTION
Loss of set-up data
The current meter configuration file must be saved before beginning the 3810
Series electronics .
Failure to save the current configuration file can result in the loss of important set-
up data.
Steps 3 through 8 provide more detailed instructions on obtaining the required
information with respect to the communications set-up of the 3800 Series
electronics, however, if these settings are already known, these steps can be
skipped. Step 8 is for Frequency and Diagnostic outputs. For reference, the known
values should be entered in the
This information will be required in the setup of the 3810 Series electronics. For any
setting which is not known, the applicable step(s) for obtaining that information can
be used.
File|Meter Directory
want to .
a) Click the Direct button on the lower left corner of the Meter Directory dialog
box.
b) The Direct Connection Properties For dialog appears.
c) Obtain the Modbus ID (same as Comms Address).
Figure 1-2: Accessing Modbus ID for Ports A and B
the values for the following parameters in the
output
settings:
Port A and B: Modbus ID = _____(enter Comms Address).
Summary table of communications/output
menu path, then select the <<meter name>> you
Summary table of communications/
Plan
February 2024
settings.
7
Advertisement
Table of Contents
