Output Electrical Specifications - Huawei UPS2000-G User Manual

UPS2000-G-(6 kVA–20 kVA)
User Manual (Lead-Acid Battery)
Item
Bypass overload
capability
Input mode

3.5 Output Electrical Specifications

Table 3-7 Output electrical specifications
Item
Rated capacity
Output power
factor (PF)
Output short-
circuit current
Rated output
voltage
Output voltage
tolerance
Issue 23 (2024-03-15)
6 kVA
● When the UPS works continuously at a load rate of less
● When the load rate is within 125%–150%, the UPS
● When the load rate is greater than or equal to 150%,
One power source
NO TE
The upper and lower thresholds are configurable on the LCD.
6 kVA
6 kVA
0.9
-
208 V AC, 220 V AC, 230 V
AC, or 240 V AC (single-
phase output; select a
voltage system by setting a
voltage level on the LCD.)
±1%
Copyright © Huawei Digital Power Technologies Co., Ltd.
10 kVA
than 125%, the input switch may trip in advance.
disconnects the output after 1 minute, and the input
switch may trip in advance.
the UPS disconnects the output after 100 ms, and the
input switch may trip in advance.
10 kVA
10 kVA
-
3 Technical Specifications
15 kVA 20 kVA
● One power source
● Two power sources
15 kVA 20 kVA
15 kVA 20 kVA
Ipeak: 5 kA; Irms: 3.5 kA
(typical power supply
duration: 4 ms)
● 208 V AC, 220 V AC, 230
V AC, or 240 V AC (single-
phase output; select a
voltage system by setting
a voltage level on the
LCD.)
● 380 V AC, 400 V AC, or
415 V AC (three-phase
output; select a voltage
system by setting a
voltage level on the LCD.)
38