Safety Notes; Preconditions For Use; Conformity With European Directives - Siemens SITRANS FMT020 Operating Instructions Manual

Safety notes

3.1

Preconditions for use

This device left the factory in good working condition. In order to maintain this status and to
ensure safe operation of the device, observe these instructions and all the specifications relevant
to safety.
Observe the information and symbols on the device. Do not remove any information or
symbols from the device. Always keep the information and symbols in a completely legible
state.
Symbol
3.1.1

Conformity with European directives

The CE marking on the device symbolizes the conformity with the following European directives:
Electromagnetic compatibili‐
ty EMC
2014/30/EU
Low voltage directive LVD
2014/35/EU
RED
2014/53/EU
2011/65/EU RoHS
The applicable directives can be found in the EU declaration of conformity of the specific
device.
SITRANS Verificator
Operating Instructions, 03/2024, A5E51481698-AA
Explanation
Consult operating instructions
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to elec‐
tromagnetic compatibility
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of electrical equipment designed
for use within certain voltage limits
Directive of the European Parliament and of the Council on the
harmonisation of the laws of the Member States relating to the
making available on the market of radio equipment and repeal‐
ing Directive 1999/5/EC
Directive of the European Parliament and the Council on the re‐
striction of the use of certain hazardous substances in electrical
and electronic equipment
3
11