Connecting
6.2 Connecting SITRANS TDL
3.
Place the other two wires from the
loop cable in the ports of the ter-
minal:
• Brown –> 1
• Green –> 2
4.
Connect the green yellow PE wire with the central grounding pin at the bottom left of the enclosure.
5.
When the installation is complete,
the assembly should look like on
the following figure.
38
Placing wires from the loop cable in the terminal
Completed assembly
Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024
SITRANS TDL