Sensor Mounting - Siemens SITRANS TDL Compact Operating Instructions

Installing/mounting

5.3 Sensor mounting

5.3.2 Sensor mounting
After completing the flange alignment, user may proceed to sensor mounting.
1. Prior to installation, ensure that the ring gasket is present on the flange and mount the
2. Place the emitter
3. When installing the
4. To tighten the con-
26
receiver on the flange.
and receiver units on
respective sides of
the process.
Mounting the receiver on the flange
receiver unit, make
sure the receiver
tube is connected
properly so the front
surface of the tube is
aligned to the
alignment flange
sleeve surface. The
connection can be
tightened now.
Receiver-flange connection
nection, place the
clamp on the rim of
the tube.
Placing the clamp
Compact Operating Instructions, 05\2023, A5E51659183-AA – revised 03/2024
SITRANS TDL