Setting item
Trigger
Active Level
Hysteresis
High Alarm
Low Alarm
ON Delay
OFF Delay
Cleaning output setting
Set the cleaning device to operate with relay output.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6.4 Relay Setting" and "Cleaning output setting".
Self Checking output setting
Set an output when a malfunction such as sensor failure or disconnection
occurs.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6.4 Relay Setting" and "Self Checking output setting".
Conductivity
(0.000 to 1.000)
[EC]
High Alarm/Low Alarm
0.000 to 1.000
0.000 to Active level 0.0 to Active level
0.000 to (1.000-
Active level)
OFF
1 to 120 minutes
OFF
1 to 120 minutes
Conductivity
(0.00 to 30.00g/L)
[EC]
0.0 to 30.0
0.0 to (30.0-
Active level)
17