Adjustment - Optex SE-Cond-D Instruction Manual

8

Adjustment

Adjust and display the measurement values according to usage. In addition,
adjust and display the measurement values according to the environment
where used.
To adjust, press
•
・ Pressing
•
・ After calibration, the adjustment value returns to the initial
value. Perform the adjustment again.
• ・ If offset, span, or 2-point adjustment has already been
performed, be sure to initialize the adjustment before
Caution
performing the 2-point adjustment.
• ・ When "Display item" P.12 is changed, the values of the offset
adjustment, span adjustment, and 2-point adjustment that have
set the display item are reset to the factory default values.
Set again if necessary.
•
18
.
automatically retains the measurement value.