Sensor Setting; Display Item - Optex SE-Cond-D Instruction Manual

5

Sensor Setting

The following settings are available from SC-U1.
To start sensor setting, press
Caution
Pressing

Display item

Set the conductivity items to display as the main display of SC-U1.
Main display
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6.1 Sensor Setting" and "Display Item".
When the display item is changed, the settings of "6 4-20 mA
Output Setting" P.14 and "7 Relay Setting" P.16 that have
set the display item become OFF.
Caution
In addition, the values of "8 Adjustment" P.18, "Offset
adjustment" P.19, "Span adjustment" P.21, and "2-point
adjustment" P.23 are reset to the factory default values.
Set again if necessary.
12
.
automatically retains the measurement value.