10
Cleaning
Set the sensor cleaning setting from SC-U1.
To perform cleaning, press
・ The optional cleaning device is required to carry out cleaning.
•
・ The cleaning process consists of cleaning activation time and
•
Caution
post-cleaning standby time.
・ Pressing
•
Manual cleaning
Manually activate the cleaning device. Perform cleaning only if the cleaning
output has been set using relay output.
While cleaning the measurement value of the target sensor is retained (held).
1
Press
The sensor selection display is displayed.
Select [EC SE-Cond-D] using
2
By selecting [ALL], all of the
connected sensors can be selected.
The cleaning menu is displayed.
28
.
automatically retains the measurement value.
.
and press
.
Sensor channel
Output
Sensor
item
model