9
Maintenance Setting
Set the maintenance setting from SC-U1.
To perform maintenance, press
Caution
Pressing
Measurement value hold
The latest measurement value is retained (held). This is used for sensor
maintenance and cleaning.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "Measurement value hold".
Hold timer
Set the time period to hold the measurement value.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "8 Maintenance Setting" and "Hold Timer".
Output item
HOLD Timer
automatically retains the measurement value.
Setting range
OFF
10 to 1440 minutes (by 10 minutes)
.
Factory default
setting
60 minutes
27