Adjustment Initialization - Optex SE-Cond-D Instruction Manual

Adjustment initialization

Reset the adjustment value to the factory default value.
1
Press
The measurement item selection display is displayed.
Select an item to initialize
2
adjustment using
press
Use
The adjustment menu is displayed.
3
Select [Initialize Adjustment Value]
using
The initialize adjustment value menu is
displayed.
4
Select [NO] or [YES] using
and press
・ Selecting [Yes] executes initialization
and displays a progress bar.
・ Selecting [No] cancels initialization
and returns to the initialize adjustment
value menu.
During initialization a progress bar is
displayed.
After completion, the adjustment value
is initialized and the display returns to
the measurement value display.
26
.
.
to switch pages.
, and press
.
, and
Sensor channel
.
,
Sensor model
Output item