Extension Of Sensor Cable - Optex SE-Cond-D Instruction Manual

Extension of sensor cable

The standard length of the sensor cable is 6 m. To extend the cable, refer to
the following.
To extend the cable, connection using pull box is recommended.
Max. cable length 1200 m
(nominal cross-sectional
area of 0.2 to 1.25 mm
For the sensor cable, use a shielded cable (CVV-S) with a nominal cross-
sectional area of 0.2 to 1.25 mm
10
)
2
Pull box, etc.
2
.