Optex SE-Cond-D Instruction Manual page 25

Enter the [Point 1] display,
4
[Point 1] adjusted, [Point 2] display,
and [Point 2] adjusted values in
this order.
Select a digit by
, and press
set and the cursor moves to the next item.
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
After entering the [Point 2] adjusted
value and pressing
bar is displayed.
When completed, the display returns
to the measurement value display.
When a 2-point adjustment is performed, the offset and
span adjusted values will automatically replace the values
Reference
calculated from the displayed and adjusted values of the 2-point
adjustment.
and value by
. The value is
simultaneously while entering a value resets the
or , the value returns to the one before changing it.
, a progress
25