Optex SE-Cond-D Instruction Manual page 22

Press
1
The measurement item selection display is displayed.
2
Select an item to perform span
adjustment using
press
Use
The adjustment menu is displayed.
3
Select [Span Adjustment] using
4
Input a span adjustment value.
Select a digit by
by
When a value outside the set range is entered, a short beep sounds.
Pressing
value to the factory default setting.
By pressing
During adjustment a progress bar is
displayed.
When completed, the display returns
to the measurement value display.
22
.
.
to switch pages.
, and press
, and press
simultaneously while entering a value resets the
or , the value returns to the one before changing it.
, and
Sensor channel
.
and value
.
Sensor model
Output item