4-20 Ma Output Setting; Output Item Selection - Optex SE-Cond-D Instruction Manual

6

4-20 mA Output Setting

Set the 4-20 mA signal output setting from SC-U1.
The factory default setting is OFF for 4-20 mA signal output.
To set 4-20 mA output setting, press
Caution
Pressing

Output item selection

Select an item to output by 4-20 mA signal.
Select an item from the following.
For operation, refer to the "Universal Transmitter SC-U1 Operation
Manual", "6.3 4-20 mA Setting" and "Output Item Select".
When "Display item" P.12 is changed, the output item of
Caution
the channel of 4-20 mA setting that have set the display item
becomes OFF. Set again if necessary.
Output item
[Display]
Conductivity
[Conductivity]
14
automatically retains the measurement value.
.