Nailor 35SW Manual page 90

Procedure to set the Terminal Unit functions (continue)
PROCEDURE
2 Select the box settings display.
3 Set the primary VAV terminal unit
K factor.
4 Set the secondary VAV terminal
unit K factor.
Not used in all models.
5 Set the mode of reheat for the
terminal unit.
Not used in all models.
6 Set the fan option.
Not used in all models.
Date: 10-2016 Supersedes: 7-2016
Nailor reserves the right to change any information concerning product or specification without notice or obligation.
Installation and Operation Manual
1. From the CNFG display, press the
to show the BOX display.
2. Press the button to select the CNFG options.
The display changes to STPT.
∆
3. Press the or
BOX.
4. Press the button to select BOX.
Refer to the K-factor label on the controls enclosure
door of the terminal unit for appropriate value. You can
also refer to page 43, visit www.nailor.com or contact
your local Nailor Representative for more details.
∆
1. Press the or
2. Press the button to save the entry and advance to
the next function.
∆
1. Press the or
K-factor.
2. Press the button to save the entry and advance to
the next function.
∆
1. Press the or
following reheat options.
None—Reheat is not enabled.
Staged—Enables staged reheat.
Modulating—The analog reheat output varies from
0—10 volts DC.
Floating—The reheat outputs control a tristate
actuator.
2. Press the button to save the reheat option and
advance to the next function.
∆
1. Press the or
following fan options.
None—No fan is connected to the controller.
• Models: 3001, 30RE and 30RW, 3600
Series—The VAV unit includes a series fan.
• Model Series: 35S(ST), 35SE(ST), 35SW(ST),
37S(ST), 37SE(ST) and 37SW(ST), 38S/SE/SW
Parallel—The VAV unit includes a parallel fan.
• Models: 35N, 37N, 35NE, 35NW, 37NE and 37NW
2. Press the button to save the fan option and
advance to the next function.
Page 18 of 48
EZvav Digital Controls
●
STEPS
∆
or buttons
buttons to change the display to
buttons to set the primary K-factor.
buttons to set the secondary
buttons to choose one of the
buttons to choose one of the
STE DISPLAY
CNFG
STPT
BOX
PKFT
9 O 4
SKFT
9 O 4
REHT
NONE
FAN
NONE
IOM-EZVAVINST