Raise3D Forge1 User Manual page 7

Raise3D Forge1 User Manual Safety Precautions
 Some parts in the printer are sharp and may cause injury.
 When removing the printing model, please refer to the Chapter L.
CAUTION ‒ Risk of burns!
 When operating or printing at high temperatures, the shell of the appliance
becomes hot.
 Do not touch the shell of the appliance when it is hot.
 Keep children away from the appliance when it is hot.
CAUTION ‒ Risk of scalding!
 When operating or printing at high temperatures, the print bed becomes hot.
 Do not touch the print bed of the appliance when it is hot.
 Please operate with the heat - resistant gloves in the attachments box
 Keep children away from the print bed when it is hot.
 When operating or printing at high temperatures, the extruder head becomes hot.
 Do not touch the extruder head of the appliance when it is hot.
 Please operate with the heat - resistant gloves in the attachments box
 Keep children away from the extruder head when it is hot.
Safe maintenance
Take note of the safety instructions when performing maintenance work on the appliance.
WARNING ‒ Risk of electric shock!
 Improper repairs are dangerous.
 Repairs to the appliance should only be carried out by trained specialist staff.
 Only use the manufacturer's original spare parts and original accessories when
repairing the appliance.
 If the power cord of this appliance is damaged, it must be replaced by the
manufacturer, the manufacturer's Customer Service or a similarly qualified person
in order to prevent any risk.
 An ingress of moisture can cause an electric shock.
 Do not use steam cleaners or sprays to clean the appliance.
WARNING ‒ Risk of injury!
The use of non-original spare parts and non-original accessories is dangerous.
 Only use the manufacturer's original spare parts and original accessories.
5