Safety Precautions - Raise3D Forge1 User Manual

Raise3D Forge1 User Manual Safety Precautions

Safety Precautions

Please read the safety information to ensure that you use the appliance safely.
General information
You can find general information about this instruction manual here.
 Read this instruction manual carefully. Only this will ensure you use the appliance
safely and efficiently.
 This manual is intended for the installer and the user of the appliance.
 Follow the safety instructions and warnings.
 Keep the instruction manual and the product information safe for future reference
or for the next owner.
 Check the appliance after unpacking it. Do not connect the appliance if it has been
damaged in transit.
 If you have any questions, please contact our local service center or distributors.
 Any failure and losses caused by ignoring the following mentioned items, and
cautions mentioned in the operation and installation instruction are not covered by
our warranty and any liability.
Intended use
Read the information on intended use to ensure that you use the appliance correctly and
safely.
Only use this appliance:
 According to this installation and instruction manual. Make sure to follow the
installation and instruction manual for the hardware installation and filament
loading, as detailed on page 15 and 25.
 In a well-ventilated and dry environment;
 The environmental conditions used are:
 The ambient temperature is: 0-35 ;
 The relative humidity of the air is below 95% (when the temperature is 25 ).
Restriction on user group
Avoid risks to children and vulnerable persons.
This appliance may be used by people who have reduced physical, sensory or mental
abilities or inadequate experience and/or knowledge, provided that they are supervised
or have been instructed on how to use the appliance safely and have understood the
1