Dual Extruder Printing- Starting Printing - Raise3D Forge1 User Manual

Raise3D Forge1 User Manual Dual Extruder Printing- Starting Printing
J.

Dual Extruder Printing- Starting Printing

4.
5.
6.
Insert the USB device that contains your sliced
model files (.gcode or .data) into the USB slot on
the side of the touchscreen.
Open the "Print" tab, and choose "USB Storage"
to open the file storage path.
Select your dual extrusion file to check the printing
parameters and settings.
Press "Print" to start printing the test file
During printing, you can check the status from the
"Home" interface on the touchscreen, including
the remaining print time and other parameters.
NOTE: The touch screen will display an image of
your model on-screen while printing. This image
will only be shown when the file is sliced by
ideaMaker and the .data file is saved in the USB
storage device or uploaded to the screen.
32