Raise3D
Forge1
User Manual Dual Extruder Printing-Advanced Slicing
K.
Dual Extruder Printing-Advanced Slicing
1.
To perform higher-level dual-color printing and carry out offset calibration at the same time, please
do the following.
Load your filament type for both the left and right extruders.
2.
Each nozzle has a different printing range. To check the printing range of each nozzle when
aligning models, tick the "Show Extruder 's Printing Range" box.
3.
Multiple colors are available for different nozzles' printing range.
33