Raise3D Forge1 User Manual page 20

Raise3D Forge1 User Manual Hardware Installation
1.
2.
3.
When the touch screen displays the "Home"
screen, the printer is ready.
Once the unit is powered on, the printer will go
through a start-up sequence.
Your Raise3D printer will take approximately 60
seconds to boot up. When the touch screen
displays the "Home" screen, the printer is ready.
Tap the "Utilities" tab, and press the Z Homing
button.
Press OK for the print bed to begin to "Home" to
the origin position.
This will allow you to access your accessory
packages.
Open the front door, and remove the starter box
and glass plate package from the printer 's base.
Open these packages, and compare them with the
following Raise3D Supplies and Accessories list.
18