Raise3D Forge1 User Manual page 11

Raise3D Forge1 User Manual Declarations and Safety Statements
Installation
To facilitate operation and maintenance, please keep a proper distance of 50cm on the side of the
printer, 80cm on the front, 20cm on the back, and 60cm on the top during installation. No flammable
materials are allowed around the installation location.
Note: During low-temperature transportation, the printer may encounter frost or icing hazards.
The printer can be stored at room temperature for 4-6 hours before operating.
Filament and Electrical Precautions
It is strongly recommended to use Raise3D official filaments and/or default settings for better
performance. The Raise3D printer is designed with strong compatibility with filaments. However,
please be very careful when using unverified filaments and settings. This may cause abnormal
printing tasks or damage the printer.
Please consult Raise3D or authorized dealers in your area for technical support and services.
Warning: The printer belongs to EN55032 Class A. In a residential environment, the printer may
cause radio interference.
Odor
When the printer is operating, it emits a thermoplastic smell.
NOTE: Please place the printer in a well-ventilated and dry environment.
Oil in the air accumulating inside the printer may damage plastic parts. Air in a cavity with excessive
solid particles (conductive or non-conductive) may cause damage to the printer.
9