Dual Extruder Printing- Gluing - Raise3D Forge1 User Manual

Raise3D Forge1 User Manual Dual Extruder Printing- Gluing
I.

Dual Extruder Printing- Gluing

1.
2.
3.
Find the Magigoo Pro Metal glue from accessory
box.
Shake the Magigoo bottle. Magigoo is best
applied on a cold glass print surface.
Dab the applicator 3-6 times on the surface to
produce 3-6 spots of glue then spread the
application to the whole printing area of the glass
print bed surface to a thin even coat.
Note: If Magigoo does not flow one can apply a
small amount of pressure on the bottle to make
sure that the valve is activate.
31