Dual Extruder Printing-Loading - Raise3D Forge1 User Manual

Raise3D Forge1 User Manual Dual Extruder Printing-Loading
G.

Dual Extruder Printing-Loading

1.
2.
3.
Open the door, put the transparent panel down.
Place filament spools on rolling wheels in the
spool holders, with open end of filaments facing
towards the metal quick connector next to spool
holder.
Note: the filament spool weights 3kg, grip it tightly
in case of injury of filament spool sliding.
Feed open end of filaments into the guide tube
through quick metal connector until they pass
through quick metal connector.
Unplug the guide tube from extruder and keep
feeding the filament until it reaches end of
extruder.
NOTE: The operation of the left extruder is the
same as that of the right extruder. Here we take
the left extruder as an example.
26