Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Raise3D Pro3 Series
Summary of Contents for Raise3D Pro3 Series
- Page 1 Pro3 Series 3D Printer User Manual * Please review this entire manual before operating the printer. This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures.
- Page 3 The contents of this User Manual maybe updated overtime. For the latest version, scan the QR code or visit the link below. https://support.raise3d.com/Pro3-Series/user-manual-26-1399.html...
- Page 4 Pro3 Series 3D Printer / User Manual CONTENTS...
-
Page 5: General Information
Pro3 Series 3D Printer / User Manual Safety Read the following information to ensure safe usage of the appliance. General information Any damage or loss resulting from failure to follow the directions or warnings provided in this manual will not be covered under the product warranty. To ensure the printer is used safely and efficiently, carefully read through the entire manual. - Page 6 Pro3 Series 3D Printer / User Manual Safety Connect and operate the printer according to the specifications on the rating plate. Connect the printer to a power supply with an alternating current only via a properly installed outlet with grounding.
- Page 7 Pro3 Series 3D Printer / User Manual Safety Do not let children play with packaging material. CAUTION ‒ Risk of injury! The printer may vibrate when in use. Place the printer on a clean, even, solid surface. Incorrectly laid tubes and power cords may result in a tripping hazard.
- Page 8 Pro3 Series 3D Printer / User Manual Safety WARNING ‒ Choking Hazard! This machine contains many small parts and pieces. Do not allow children to breathe in or swallow small parts. Keep small parts away from children. Do not let children play with small parts.
- Page 9 Pro3 Series 3D Printer / User Manual Safety Safe Maintenance Take note of the safety instructions when performing maintenance work on the printer. WARNING ‒ Risk of electric shock! Improper repairs are dangerous. Repairs to the printer should only be carried out by trained specialist staff.
-
Page 10: Fcc Statement
Pro3 Series 3D Printer / User Manual FCC Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interfer- ence when the equipment is operated in a commercial environment. -
Page 11: Technical Specifications
Pro3 Series 3D Printer / User Manual Technical Specifications Pro3 Pro3 Plus Printer Single Extruder Print Dual Extruder Print Single Extruder Print Dual Extruder Print Build Volume (W×D×H) 300×300×300 mm 255×300×300 mm 300×300×605 mm 255×300×605 mm Machine Size 620×626×760 mm 620×626×1105 mm... -
Page 12: List Of Parts
Pro3 Series 3D Printer / User Manual List of Parts Pro3 Camera Top Cover Filament Guide Tube Extruder Flat Cable Fans Filament Run-out Sensor Hot End Touch Screen Air Flow Manager Filament Box Electric Control System USB Interface Print Bed... - Page 13 Pro3 Series 3D Printer / User Manual List of Parts A. Top Cover The upper cover of the printer. B. Extruder The part extruding filament to the hot end; brand-new unitized extruders, which are more convenient to disassemble; a dual extrusion structure is adopted to adapt to a variety of filaments.
- Page 14 Pro3 Series 3D Printer / User Manual List of Parts L. Filament Box The place where the filament is discharged, which can accommodate 2 rolls of 1kg filaments at the same time. M. Electric Control System Stores the motion controller board.
-
Page 15: Safety Marks
Pro3 Series 3D Printer / User Manual Safety Marks Hot Surface: The hot surface sign indicates the presence of devices with high temperatures. Always use extra care when working around heated components. Wait half an hour after switching off the printer before handling parts to prevent burned fingers. -
Page 16: Installation
No flammable materials are allowed around the installation location. Filament and Electrical Precautions It is strongly recommended to use Raise3D official filaments and/or default settings for better performance. The Raise3D printer is designed with strong compatibility with filaments. However, please be very careful when using unverified filaments and settings. - Page 17 Safety Marks Electromagnetic Compatibility - EMC Simplified EU Declaration of Conformity Raise3D declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of the EU declaration of conformity is available at https://www.raise3d.com.
-
Page 18: Hardware Installation
Pro3 Series 3D Printer / User Manual Hardware Installation Remove Remove (×24) Locate the four shipping zip ties, and Peel off the yellow stickers and remove remove them. the 24 security spacers. It is recommended to unclip these as These clips are designed to hold the opposed to cutting them. - Page 19 "Home" screen, the printer is ready. Once the unit is powered on, the printer will go through a start-up sequence. Your Raise3D printer will take approxi- mately 60 seconds to boot up. When the touch screen displays the "Home" screen, the printer is ready.
- Page 20 Pro3 Series 3D Printer / User Manual Hardware Installation After removing the starter box, keep following the start-up wizard to finish the network connection, printer settings and RaiseCloud settings. After the start-up wizard, the printer will carry out 5-steps Offset Calibration, and the whole process takes about 1 hour.
- Page 21 Pro3 Series 3D Printer / User Manual Hardware Installation Adjust the flatness of the build plate. Precise flatness helps to get a better bottom surface of the model, avoiding warping or the model detaching from the build surface. Adjust the matching gap between the...
- Page 22 Pro3 Series 3D Printer / User Manual Hardware Installation Raise3D Supplies and Accessories Power Cable Hex Wrenches Filament Filament Guide Tube (×5) (×2) (×2) USB Storage Filament Holder Spatula Heat Resistant Gloves (×2) Nozzle Cleaning Kit Tweezers Thumb Screws 0.3 mm Feeler &Other Accessories...
- Page 23 Pro3 Series 3D Printer / User Manual ideaMaker Installation The slicing software, ideaMaker, is available on the USB storage device included with your printer. www.raise3d.com Additional downloads and versions are available online at: Download ideaMaker https://www.raise3d.com/download/ WINDOWS Install ideaMaker, and click "Next".
- Page 24 Pro3 Series 3D Printer / User Manual ideaMaker Installation Follow the instructions provided by the guide, and click "Install". After the installa- tion is finished, click "Next" to go to the next step. Click "Finish" and ideaMaker is installed.
- Page 25 Pro3 Series 3D Printer / User Manual ideaMaker Installation MAC OS X Open the Disk Image for the ideaMaker installer. This is located in the USB storage device included with your printer. Alternatively, you can download the latest version from www.raise3d.com/pages/download#down-im.
- Page 26 Pro3 Series 3D Printer / User Manual ideaMaker Initial Settings When launching ideaMaker for the first time, you will need to select your printer model from the drop-down list, then press "Next". Select the diameter of your filament. Press "Finish" to finalize the initial settings.
- Page 27 Pro3 Series 3D Printer / User Manual...
- Page 28 Pro3 Series 3D Printer / User Manual Using ideaMaker Select your type of Platform Addition and Support in the "Edit" window. Click "Save and Close" to return to the previous menu. Click "Slice" to generate your file. Save the sliced files (.gcode and .data) by exporting them on the USB storage device.
- Page 29 Complete the feeding operation according to the instructions on the screen. NOTE: This document's instructions are based on the properties of Raise3D PLA filament. This is the standard filament included with your product and it is advised to use Raise3D PLA for testing...
- Page 30 Pro3 Series 3D Printer / User Manual Dual Extruder Printing - Slicing Choose one of the models and set its designated extruder as Left Extruder from the left side "Model Info" window. " Choose the other model and set extruder as the Right Extruder using the "Model...
- Page 31 Pro3 Series 3D Printer / User Manual Dual Extruder Printing - Slicing Click the "Start" or " " button to begin slicing the model. Confirm your printer type and materials for both extruders, then select the standard sliding template. Click "Edit" to select the type of Platform Addition and the type of Support.
- Page 32 Pro3 Series 3D Printer / User Manual Dual Extruder Printing - Slicing Select your type of Platform and Support in the "Edit" window. Click "Save and Close" to return to the previous menu. Click "Slice" to generate your file. Save the sliced files (. gcode and .data) to your USB storage device.
- Page 33 Pro3 Series 3D Printer / User Manual Dual Extruder Printing - Start First Printing Insert the USB device that contains your sliced model files (.gcode or .data) into the USB slot on the side of the touchscreen. USB Storage Open the "Print" tab, and choose "USB Storage"...
- Page 34 Pro3 Series 3D Printer / User Manual Dual Color Printing - Slicing To perform higher-level dual-color printing and carry out offset calibration at the same time, please do the following. Load your filament type for both the left and right extruders.
- Page 35 Pro3 Series 3D Printer / User Manual Dual Color Printing - Slicing Multiple colors are available for different nozzles' printing range. The "Align Together" feature can align multiple models to their original relative position (as defined during modeling) with each other.
- Page 36 Pro3 Series 3D Printer / User Manual Dual Color Printing - Slicing You may also set the extruders though the "Model Info" menu from the main window. Double click a printing template in the "Select Template" windows, and click the...
- Page 37 Pro3 Series 3D Printer / User Manual Dual Color Printing - Slicing You can specify a nozzle to print support structure under Support tab. ideaMaker is not able to detect when a floating model is being supported by the opposite extruder and will prompt the user to add supports. The user should select...
- Page 38 NOTE: You can edit the extruder's retraction amount under the "Ooze" tab. We recommend maintaining the "Extruder Amount of Extruder-switch" between 2-4 for standard filament types, and from 6-10mm for Raise3D Premium PLA. Wipe Wall Enable Wipe Wall will add extra shell(s) around the model during dual-extruder printing.
- Page 39 Pro3 Series 3D Printer / User Manual Dual Color Printing - Slicing Dual-extrusion with Multiple Filament Types Printing with multiple material types may limit printing compatibility. The table below lists all the officially-supported dual-extrusion material combinations current- ly possible on the Pro3.
-
Page 40: User Interface
Pro3 Series 3D Printer / User Manual User Interface · Status Bar, EVE · Menu title, Settings button · Hot End and heated bed temperatures · Current model name, total print time, current printing status and height · Visual display of current model ·... - Page 41 Pro3 Series 3D Printer / User Manual User Interface · Moving step distance setting · Disable Motor button · X/Y/Z axes move/home · Load and unload function for the L&R extruders Utilities · Choose where to load the print job from ·...
- Page 42 Experiencing Difficulties/Contact Information If you run into any issues during this guided setup, please contact our expert techni- cians by opening a ticket online at support.raise3d.com.
- Page 44 US Office 43 Tesla, Irvine, CA 92618, USA Netherlands Office Stationsplein 45 Unit A4.004 3013AK Rotterdam, the Netherlands China office 4th Floor B5, 1688 North Guoquan Raod, Yangpu District, Shanghai 200438...