Printing A Trace Job Within Ips Manager - Xerox 6100BD - Phaser Color Laser Printer User Manual

Printing a Trace Job Within IPS Manager

IPDS User Guide
server Queue Manager. This print queue initially has an
Accept value of Yes and a Release value of Yes.
• Ensure that no overrides are set on the queue for any of the
properties defined earlier in this section.
• Ensure the IPS Manager has the streaming queue selected as
part of the active Job Profile.
To verify that the installation and initial setup are successful, print
a host job and either the US Letter or the A4 sample job. If both
print successfully, installation verification is complete.
NOTE: It is important to be aware that you should never submit an
IPDS job to a paused print server. IPDS jobs will hang when they
are submitted to a system in a paused state. This is normal
behavior for IPDS jobs; while all other PDL types can RIP and wait
for the printer, IPDS jobs cannot.
In addition, if you installed the IBM® AFP resident outline fonts,
print the scfont.trc sample job to verify that the fonts were loaded
correctly.
During the installation process, six sample Xerox FreeFlow® Print
Server IPDS trace jobs are provided. These jobs can be used to
either verify printer operability after the Xerox FreeFlow® Print
Server IPDS software is installed or for diagnostic purposes:
• afptrace.let — prints a sample IPDS job formatted for US
Letter paper
• afptrace.a4— prints a sample IPDS job formatted for A4 paper
• scfont.trc— prints a sample IPDS job using resident outline
fonts formatted for either US Letter or A4 paper.
• micrtrace.letter — prints a sample IPDS Magnetic Ink
Character Recognition (MICR) job formatted for US Letter
paper
• micrtrace.a4 — prints a sample IPDS MICR job formatted for
A4 paper
• micrtrace.legal— prints a sample IPDS MICR job formatted for
US Legal paper
In order for the trace scfont.trc to print correctly, the IBM® AFP
fonts must be loaded on the printer and Enhanced Font Support
must be enabled.
NOTE: These jobs test only Xerox FreeFlow® Print Server IPDS
processing on the printer.
The trace files are set up to use the installation default
parameters. If you plan to run the A4 trace instead of the US
Letter trace, change the Media Definition for the Xerox FreeFlow®
Installation and Setup
2- 11