Y59-Bar Code Definition - Xerox 4215 Reference Manual

Y59—Bar Code Definition
XEROX MRP FAMILY COAX COMMAND REFERENCE
@Y59, <Def. no.>, <Bar code type>, <Height>
{,<Expansion>}@
Defines the bar code generated by function Wn. Up to eight bar
codes are defined and selected for use with function W—Print
Bar Code.
<Def. no.> Numeric value from 1 to 8 specifying the bar
code number
<Bar Code Bar Code type is a 2-digit number. The valid
type> values for the first digit are:
3X
2X
The valid values for the second digit are:
X2
X3
X4
X5
X6
X8
X9
<Height> Bar code height in lines, value from 1—255 (using
9 LPI).
<Expansion> Horizontal expansion factor that selects values
from 1 to 32. This value is optional. Default is 1.
The expansion resolution is enhanced where the
integer expansion factor can be added by a
fraction of 1 to 7. (Example, expansion = 2.3)
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Bar code with no alphanumeric characters
printed under the bar code
Bar code with alphanumeric characters
printed under the bar code. Text will be
printed with the resident font in 10 CPI.
EAN 89, EAN13 & UPC-A
7 data: check digit 8 is included. EAN8
8 data: check digit 8 is check digit. EAN8
11 data: check digit 12 is included. UPC-A
12 data: check digit 13 is included. EAN13
13 data: check digit 13 is checked. EAN13
2 of 5 interleaved
2 of 5 industrial
Codabar
MSI, check digit must be supplied by the
system.
Plessey, check digit must be supplied by
the system.
3 of 9, Both fine and medium are
supported depending on expansion.
3-43