Host
Sysgen samples
XEROX MRP FAMILY COAX COMMAND REFERENCE
Configuration 4 shows a 4230/MRP attached to a previously
unused port, a 4219/MRP attached to a previously unused port
through a communications module, and the IBM 3287 attached
to its previous port. See Figure 6-4.
Figure 6-4.
Configuration 4
37X5
Transmission
Control Units
The sample sysgens in this section represent parameters to enter
when using IBM copyright programs to perform the following:
Sample IO Gen for the 3274—non-SNA controller
•
Sample VTAM parameter for local non-SNA 3270 terminal and
•
printer
Sample VTAM parameter for local SNA 3270 terminal and
•
printer
Sample NCP Gen—Group, Line, Physical Unit (PU), and
•
Logical Unit (LU) Definitions—3274-61C
Sample NCP Gen—Group, Line, PU, and LU Definitions—
•
3276C
JES/328X Print Facility parameters
•
Sample mode table entries for 3278-2 terminals (by control
•
unit type).
Sample mode table entries for 3278 printers (all control
•
units).
CONFIGURATION AND SYSGEN SAMPLES
4230/MRP
3174
4219/MRP
3287
3268
3287
6-3