Xerox 4215 Reference Manual page 238

FORMS UTILITY FOR THE COAX ENVIRONMENT
42XX/MRP transparency
I-2
Below is an example of a VPS Remote Configuration file.
******************************************
* LPA0DT20 - REMOTE 156 FOR XEROX CENTRE *
******************************************
*____________________________*
* VTAM DEFINITIONS
*____________________________*
LUNAME = LPA0DT20,
ALOGMODE = SCS,
SEPINFO = USEREX01,
*____________________________*
* JES SYSOUT SELECTION CRITERIA
*____________________________*
TRACE = (Y,05),
TRNCLASS = (A,C,35),
DEST = R156,
CLASS = ABCJ,
CHNSIZE = 0,
COMPRESS = N,
MERGE = Y,
RUSIZE = 1536,
SEPAR = N,
AUTOEJCT = Y,
FCB = N,
*____________________________*
* GROUP DEFINITIONS
*____________________________*
GRPNAME = USMG
In order for transparency data (hexadecimal 35) to be recognized
by the 42xx/MRP, the printer must be placed in transparency
mode. The Function Selection via Line (FSL) command, Y37,
allows a user to select an IBM printer emulation. By sending Y37
with a value of 4 via FSL command, the printer will be placed in
transparent mode. Follow the steps below:
1. Create a file containing the following command:
&&??%%Y37,4%&&??<SPACE>
This sets the printer in transparent mode and resets the
escape character to NONE.
Note: To save the settings in permanent memory on the
printer, FSL X1 must be added to above command. For
example, this command sets the printer in transparent mode:
&&??%%Y37,4%
The following command saves the settings in permanent
memory and resets the escape character to NONE:
&&??%%X1&&??<SPACE>
XEROX MRP FAMILY COAX COMMAND REFERENCE
*
PRINTER LUNAME
DEFAULT LOGMODE ENTRY
*
DEST ID
OUTPUT CLASSES
SCS PRINTER
NO COMPRESSION
PRINTER BUFFER SIZE
SEPARATOR = BOTH
AUTOMATIC EJECT = YES
FCB SUPPORT = NO
*