Y47-Esc-Mode Selection - Xerox 4215 Reference Manual

Y47—ESC-Mode Selection
XEROX MRP FAMILY COAX COMMAND REFERENCE
@Y47, n
or
@@!ascii ascii@
Sends hexadecimal (HEX) codes transparent to the printer, and
selects Tel-a-graf support. This function takes effect as soon as it
is received.
ASCII mode is definition PCL 5 and PostScript Level 2 commands
sent directly to the printer.
n
ASCII
Example 1 @Y47,2@ selects a Tel-a-graf support.
Example 2 @02 41 42 sends HEX codes 41 42 to the printer.
Example 3 @@'1B'&11H@
This is another example of a command string. An apostrophe (')
is used to enter ASCII mode.
Between the two leading and the trailing escape characters, all
spaces, 3270 control codes, and the apostrophe character is
ignored, They may be inserted in the data stream to make it
more readable.
FUNCTION SELECTION VIA LINE (FSL) COMMANDS
Valid values are:
1* @'XX' sent as 'XX'
@@'XX' sent as 'XX'
@@!ascii ascii@ sent as ascii.
2 Tel-a-graf support
@@'XX' sent as 'XX'
@@!ascii ascii@ sent as ascii.
3 @'XX' sent as 'XX'
@@'XX' sent as 'XX'
@@!ascii ascii@ sent as ascii.
@, @-@, @ sets Filter mode On
@, @=@, @ sets Partial Filter mode On
@,@+@,@ sets Filter mode Off
In Tel-a-graf mode, the first two decimal digits
after the escape character are used to determine
the length of the string used.
Filter mode is a special compatible feature for
replacing protocol converters. The filter-modes
suppress control codes or text.
Data in plain text
3-39